Install Ubuntu Server 9.04 (Jaunty ) with OpenVox B800P/B400P/B200P/B100P

Hi,

Did you test this settings with the Openvox B800P card?
can you make a documentation about the jumper settings for the B100 B200 B400 and B800 isdn card?

thx in advance.

best regards

Patrick

Hi,

how looks like the configuration file /etc/misdn-init.conf and /etc/mISDN.conf for this setting?

regards

Patrick

hello
1 yes, we do test this setting with OpenVox B800P.
2 we have jumper setting in user manual.
3 for the /etc/misdn-init.conf and /etc/mISDN.conf file setting,
you only need to retify the NT or TE model according to your port need.

Hello,For your first question, we did test B800P with that environment yesterday! And in our B800P user manual, there are details about the jumper settings. You have to read it for reference first.The second, the attachment is the /etc/mISDN.conf in my test machine. Moreover, there is no misdn-init.conf in there.misdn-init.conf is the previous version includes. For the misdn-init.conf, please refer to this link. http://www.voip-info.org/wiki/view/chan_misdn



Best Regards!
Joe.Yung

Hi,

in the Documentation:
http://downloads.openvox.cn/pub/manuals/eng/B800P_User_Manual_mISDN.pdf
in point 1.A 1.B and 1.C where details about the jumper settings, but i can't verfify this settings on the Card.
Can you make a documentation that containing a exact declaration of Jumper Numer/Name and status of the setting?

For Example:
Jumper SW01 on pin 2 and 4 is the setting termination with 100 Ohm.

You can also make this with picutre.
please look at this point the documetation of the G400P gsm card:
http://downloads.openvox.cn/pub/manuals/eng/G400P_User_Manual.pdf
look at point "Chapter 3 Hardware Setting"

best regards

Patrick

Hello Patrick,
Please read this link for reference:
http://bbs.openvox.cn/viewthread.php?tid=1028&extra=page%3D1



Best Regards!
Joe.Yung